如何配置桌面域直通在StoreFront和Receiver
http://support.citrix.com/article/CTX133855How to Configure Desktop Pass-Through with StoreFront and Receiver
[*]CTX133855
[*]Created onMar 26, 2014
[*]Updated onNov 21, 2014
[*] 35 found this helpful
ArticleTopic: Authentication, Configuration, Connectivity
See Applicable Products
ObjectiveThis article describes how to integrate pass-through authentication with StoreFront and Windows Receiver.Requirements
[*]Citrix Receiver
[*]StoreFront
[*]Windows Domain Workstation
[*]Refer to the feature "Pass Thru Authentication" in the article CTX104182 - Receiver - Client Feature Matrix
InstructionsComplete the following steps to integrate pass-through authentication:
[*]Enable the Domain Pass-through authentication method in StoreFront.
[*]On the domain workstation, install CitrixReceiver.exe with the /includeSSON switch from the command line.http://support.citrix.com/simg/?eid=ka260000000TfZb&feoid=00N60000002SkzT&refid=0EM60000000POCH
[*]Install the icaclient.adm template and configure by using gpedit.msc > Computer Configuration.
[*]Right-click Administrative Template > Add/Remove Templates > C:\Program Files (x86)\Citrix\ICA Client\Configuration\icaclient.adm.
[*]Select User Authentication > Local user name and password and enable the following options:
[*]Enable pass-through authentication
[*]Allow pass-through authentication for all ICA connectionshttp://support.citrix.com/simg/?eid=ka260000000TfZb&feoid=00N60000002SkzT&refid=0EM60000000POCO
Note: Smart card, Kerberos, and Local user name and password policies are inter-dependent. The order of configuration is important. We recommend to first disable unwanted policies and then enable desired one. The result should be validated.
[*]After you enable the policies in the icaclient.adm template, run the following command:gpupdate/force
[*]Add the StoreFront Fully Qualified Domain Name (FQDN) to the Local Intranet zone in Internet Explorer.
[*]Restart the workstation.
[*]During restart, verify if the ssonsvr.exe process is running in the Task Manager:
http://support.citrix.com/simg/?eid=ka260000000TfZb&feoid=00N60000002SkzT&refid=0EM60000000POCP
[*]Create an account in Citrix Receiver which points to the StoreFront store that has enabled desktop pass-through. For example, https://SF-FQDN/Citrix/Store.
The application subscription list or the Add Apps screen appears.
[*]Ensure that the ssonsvr.exe was installed during the command line install by verifying if the following path contains the installed executable:
C:\Program Files (x86)\Citrix\ICA Client\ssonsvr.exehttp://support.citrix.com/simg/?eid=ka260000000TfZb&feoid=00N60000002SkzT&refid=0EM60000000PkKD
[*]Ensure that the workstation is a part of the trusted domain that the StoreFront server is hosted on.
[*]XML Trusts might be applied on XenApp and/or XenDesktop Servers.
Note: Receiver standard is the only supported version for desktop pass-through to a StoreFront store. Receiver enterprise does not work. If you want to use Receiver Enterprise with StoreFront and Desktop Pass-through, you’ll need to configure the Legacy PNAgent site. Refer to Citrix Documentation - Configure authentication for XenApp Services URLsIf StoreFront is configured by using http:// and not the recommended https://, refer to the article CTX124375 - Dazzle Store Error: The specified server URL could not be contacted.
Additional ResourcesCTX139319 - How to Configure NetScaler Gateway with StoreFront and App ControllerCTX104182 - Receiver - Client Feature Matrix
页:
[1]